Analysis of Common Yield Problems in Asphalt Mixing Plant

Pubdate: 2017-12-11 13:20:11
Pageview: 289 раз

In the road construction process, the most common problem is the output of asphalt mixing plant. This problem directly affects project duration. There are several reasons why the output of asphalt mixing plants is unstable or inefficient:

1. Raw material ratio is unreasonable. Raw materials are the first step in production. If the ratio of raw materials is unreasonable, it will affect the subsequent construction and lead to the decline of construction quality. In production, the proportion of cold aggregate should be adjusted according to the actual situation.

2. The burning value of the fuel oil is insufficient. To ensure the quality of construction, the quality of the fuel should be selected according to the prescribed standards. If the inferior diesel is chosen for the sake of cheap, it will seriously affect the heating capacity of the drying cylinder, resulting in the low yield of the asphalt mixing plant.

3. The temperature of discharging is uneven. As we know, the temperature of the material has a significant impact on the quality of service quality. If the temperature is too high or too low, the material will become waste because it cannot be used. This not only increases the production cost, but also seriously affects the production output.